Connection kit PAC-IF011B-E for customer heat exchangers
With the connection kit, a large number of types of heat exchangers can be used with Mr. Slim outdoor units of the P-Series.
Possible applications:
| • |
Ventilation units |
| • |
Heat pumps |
| • |
Air curtains |
The connection kit consists of the controller box inclusive of the special circuit board with microprocessor control as well as two temperature sensors. The controller box is integrated into the control of the Mr. Slim outdoor unit.
The following settings can be made with the aid of external signals:
| • |
Capacity settings in 8 stages from 10 to 100% |
| • |
Heating/cooling mode |
| • |
Compressor stop |
Possible input signals for capacity target setting:
| • |
0-10V |
| • |
4-20mA |
| • |
1-5V |
| • |
0-10kΩ |
| • |
Potential-free contacts |
Use of connection kit with ventilation system
|
|
Output of all relevant operating data as a potential-free contact:
| • |
Operation |
| • |
Alarm |
| • |
Compressor operation |
| • |
Defrost |
| • |
Cooling mode |
| • |
Heating mode |
Alternatively, the PAC-IF011 can be used in return air controls. Together with the optional remote control PAR-21MAA, control is then effected on the basis of the set target temperature.
Optional accessory: Cable remote control PAR-21MAA
Capacity settings in 8 stages
1 PAC-IF011 connection kit
2 Ventilation unit
3 Ventilation system control
4 Mr. Slim outdoor unit
5 Heat exchanger (supplied by customer)
6 Intake line
7 Liquid line/injection line
8 Temperature sensor/injection line
9 Temperature sensor for return air/room air (optional) |
